Alux Crab RailInstallable on ceiling, wall or floor
The Genesi Alux Crab rail is an anchor device that complies with EN 795:2012 Type D, CEN/TS16415:2013 and UNI11578:2015 standards and allows the protection of up to 3 operators.
Made of a special anodized aluminum alloy, its profile has been specially designed to ensure light weight, great versatility in design, ease of installation and low visual impact. AluxCrab can be installed on the ceiling, wall or floor with a maximum distance between fixings of 3 meters, and the joint can be made at any point in the span between two fixings.
A range of curves, fasteners and special brackets are available, which can also be designed ad hoc, to make the rail a safe anchor that is fully integrated and can be integrated into the structure to be secured. AluxCrab can be used with the dedicated mobile anchor point, XC10A, made of stainless steel with excellent mechanical and chemical resistance characteristics.
The XC10A trolley was developed to ensure excellent sliding in all three types of installation thanks to the special brass-coated rolling bearings.
AluxCrab is made of materials that prevent the accumulation of electrostatic charges and the generation of triggers and can be configured in the version for suspended work with fasteners placed at most every 1.5 meters. In the application for suspended work, two trolleys must be used, one of which is equipped with a special brake to stop movement on the rail.
Components
XC01
Rail
XC02 – XC03 – XC04
Curves
XC21
Junction
XC10A
Trolley
XC19
Openable end stop
XC20
Fixed end stop
Accessories
XC01 Rail
Binary designed to provide protection for up to three operators with a system of compact dimensions and low visual impact, which can be installed on the ceiling, wall or floor.
Material: aluminum extrusion
Lenght: poles of max 3 m
XC02 Ceiling and floor curve
Component that enables a 90-degree curve in ceiling and floor, left and right.
Material: aluminum extrusion
Angle: 90°
XC03 Internal wall curve
Component for making an internal 90° curve in wall installations.
Material: aluminum extrusion
Angle: 90°
XC04 External wall curve
Component for making an external 90° curve in wall installations.
Material: aluminum extrusion
Angle: 90°
XC21 Junction
Junction designed to connect two sections of rail, thanks to an EPD insert that provides continuity and facilitates locking and positioning in the rail. Only one splice can be made between two fasteners.
Material: stainless steel ed EPDM
XC10A Trolley
Mobile anchor device designed to be used individually in fall arrest configuration or in pairs (two XC10A) for suspended work.
Material: stainless steel with 4 high-slip wheels
XC19 Openable end stop
Openable end stop used to prevent accidental exit of the mobile anchor device (XC10A) and, at the same time, allow its insertion.The device is designed so that it can only be opened by two voluntary movements and closes automatically upon release.
Material: aluminum extrusion
XC20 Fixed end stop
Fixed end stop used to prevent accidental exit of the movable device, and the use of the two blocks, prevents its removal from the rail.
Material: aluminum, stainless stee and EPDM
XC31 Fixing clamp
Clamp with double fasteners XC31 for wall and floor installations and for making rail end fasteners.
The free rail section (cantilevered) should never exceed 20 cm from the end fasteners.
Material: stainless steel
XC32 Fixing clamp
Intermediate clamp used as intermediate in wall and floor installations and can also be used as terminal in ceiling installations.
Material: stainless steel
XC30 Carpentry fixing
Carpentry direct attachment insert designed for use in ceiling, floor or wall installations.
Material: stainless steel
Browse our catalogue
Fall protection systems