Exagon Lifeline kitRope lifeline for structures with low load-bearing capacity.
Exagon Lifeline kit
Rope lifeline available in practical 15, 30 and 45 m kits.
The EXAGON TM lifeline complies with the safety requirements set out in EN 795:2012 for anchor devices that fall under type C, i.e. horizontal flexible anchor lines with a maximum inclination of 15° to the horizontal, and also complies with the Italian standard UNI11578:2015.
The anchoring device employs a flexible anchor line suitable for structures and roofs with low or reduced load-bearing capacity, thanks to its deformability, which allows it to dissipate the energy generated by a fall.
It consists of a metal cable stretched between two or more elements fixed directly to the receiving substructure or, if necessary, to adequately sized
supports, with an energy absorber mounted at the end of the line, which dampens the energy in case of operator fall.
The passage of the intermediate
elements and corner transmissions takes place by using a simple EN362 connector connected to a double lanyard or a double lanyard that allows
hook-unhook.
All components making up the device are weld-free and have been studied to adapt different types of supports according to the requirements and
to reduce both installation time and the number of different tools required for assembly.
The device can be used simultaneously by 3 operators and complies with technical standard EN 795:2012 Type C and technical specification CEN|TS 16415:2013; it is covered by a 10-year warranty and subject to annual periodic maintenance.
Components
EXA25
Extremity and intermediate element
EXA10
Energy absorber
EXA6
Cable clamp
AP-CAVØ8-15
Cable
Accessories
EXA-KIT15
Kit for securing 15m, includes:
– 2 EXA25 Elements
– 15m of 8mm diameter cable with tensioner AP-CABLE8-15
– 1 EXA10 energy absorber
– 1 CA00 Mandatory sign
– Manufacturer’s information note
EXA-KIT30
Kit for securing 30m, includes:
– 3 EXA25 Elements
– 30m of 8mm diameter cable with tensioner AP-CABLE8-30
– 1 EXA10 energy absorber
– 1 CA00 Mandatory sign
– Manufacturer’s information note
EXA-KIT45
Kit for securing 45m, includes:
– 4 EXA25 Elements
– 45m of 8mm diameter cable with tensioner AP-CABLE8-45
– 1 EXA10 energy absorber
– 1 CA00 Mandatory sign
– Manufacturer’s information note
EXA6 Cable clamp
Pair of elements to make a corner in the Exagon lifeline.
Material: Stainless Steel
Cable
The steel cable allows the operator to be anchored to the lifeline.
Material: Stainless Steel
ADA80 Adapter
Adapter for installation of Trilob line intermediate elements to AP50, AP50C and AP100 poles. It is attached to the pole by 4 self-tapping screws, provided with a washer and EPDM gasket.
Material: stainless steel
EXA20 Shelf support
Bracket support designed for CLS walls and steel or wooden structures. Bracket with dimensions 170×170 mm and a thickness of 8 mm
Material: cataphorized and painted steel
AP50 Flat base support
It is used as support for all line components. It consists of a pole with a maximum height of 50 cm, adjustable in place, and a socket base.
Material: cataphorized steel base and aluminum pole
AP50C Hut shape base
It is used as support for all line components. It consists of a pole with a maximum height of 50 cm, which can be adjusted in place, and a gabled shaped base for roofs with a maximum slope of 30%.
Material: cataphorized steel base and aluminum pole
AP100 Flat based support
Reinforced flat base support for all line components. It consists of a pole with a maximum height of 100 cm, adjustable in place, and a socket base with a truncatedpyramidal side surface.
Material: cataphorized steel base and aluminum pole
EXA50 Flat base support
Flat base support for all line components. It consists of a pole with a height of 50 cm and a tumbler base.
Material: cataphorized and painted steel
EXA50C Gabled support
Gabled support for all line components. It consists of a post with a height of 50 cm and a shaped gabled base, which is ideal for ridges in double-pitch steel or brick/CLS roofing.
Material: cataphorized and painted steel
EXA50S Narrow base support
Support with narrow base for all line components. It consists of a pole with a height of 50 cm and a flat, narrow base ideal for wooden ridges.
Material: cataphorized and painted steel
PL23 Plate for corrugated metal sheet
Corrugated sheet metal plate adaptable to different corrugation pitches, from 240 to 390 mm.
Material: stainless steel
PL25 Plate for seam roof
Standing seam plate adaptable to different pitches of the fretwork, from 350 to 610 mm, attaches using 4 S-5 clamps with clamp type E, B or Z.
Material: stainless steel
Clamps
CP-AP Coounterplate
Counterplate CP-AP designed for the application of AP100, AP50 and AP50C supports.
Material: cataphoretic steel
Advantages
Approved for use by up to 3 operators at the same time
Possibility of direct attachment to the structure
Guarantee of constant voltage over time, thanks to the plate with SIM card inserted in the absorber block
AISI316 stainless steel elements moulded in series
High-slide corner cable loop
Lightweight and attractive design
Reduced loads on structures in the event of a fall
Reduced installation costs
Customised bracket design
Easy and fast installation thanks to M12 screw/bar fastening
Possibility of assembling the elements without the use of tools
Ergonomics
Lightness
Modularity
Ten years warranty
Certifications according to the strictest industry standards
Testing to verify proper installation
