VerticalX Vertical lifelineFlexible lifeline for ladders and vertical walkways.
Vertical X is a flexible lifeline suitable for protection against falls from heights to be installed on ladders and vertical walkways.
Thanks to the geometry of the end supports and the cable grommet, the passage of the shuttle is smooth and precise, guaranteeing an immediate stop at all times in the event of the operator accidentally falling.
Engagement and exit of the fall arrest shuttle can be performed at any point in the system.
The shuttle is equipped with an energy absorber according to EN 355 to limit the stopping force to 6 kN, is certified according to EN 353-1:2014+A1:2017 and is CE marked.
The system is mainly installed on existing ladders, but a wide range of standard and special brackets allows it to be applied directly on load-bearing structures.
Components
VEX016
Top step fixing
VEX017
Step fixing support
VEX015
Terminal element
VEX004
Cable gland
VEX001
Vertical trolley
Accessories
VEX001 Vertical trolley with energy absorber
Guided fall arrest device to allows smooth movement both uphill and downhill, stopping instantly if the operator falls.
Terminal element
It is made of stainless steel and is fixed directly to the structure or to the existing
staircase with special brackets (VEX016 – VEX017 – VEX006).
Materiala: stainless steel
VEX004 Cable gland
Cable gland to prevent sway caused by wind in outdoor applications. Such movement could cause damage to the structure or the cable itself; installation is recommended every 9 meters.
Material: stainless steel
VEX321 Cable and tensioner locking system
The element allows you to apply pre-tension on the flexible line.
Material: stainless steel
VEX006 Bracket for fixing on upright
The VEX006 bracket can be fixed on stair uprights having the following dimensions:
- Round bar 28 ≤ Ø ≤ 60 mm
- Square profile L ≤ 60 mm,
- Rectangular profile L ≤ 100mm, l ≤ 60 mm
Material: stainless steel
VEX016 Top fixing
Bracket for fixing the end element on the top step.
Material: stainless steel
VEX017Additional bracket
Step bracket used to directly anchor the lower end element (VEX015) or the cable gland (VEX004) to the rung.
Material: stainless steel
VEX321-CAVO8 Cable
The cable is supplied with tensioner already crimped to the upper end of the line.
Material: stainless steel
VA00 Sign
Materiale: aluminium
Advantages
High standards of ergonomics and safety
Immediate safety lock
6kN energy absorber
Design flexibility
High-performance materials
Ten years warranty
Our references
Browse our catalogue
Catalogue