Genesi
Genesi

Allukemi Step Gangways Gangways and walkways against the risk of failing from heights.

Allukemi Step Gangways 

Walkways: Allukemi Step parapets and steps

A line of aluminium gangways and walkways designed to create safe routes with respect to the risk of falling from heights, with reference to access, transit and work at height on non-load-bearing surfaces.

Allukemi Step walkways consist of 25 cm deep side profiles and walkway platforms of variable width from 60 to 120 cm in a single span.

Both elements are manufactured from a corrosion-resistant aluminium alloy and fixed to the joints and supports with stainless steel screws.

Thanks to their conformation, profiles and platforms can be assembled to make up staircases and passages of sheds or steeply sloping sections.

Our technical department is available to study and realise the most suitable solutions for each problem and structure.

The Allukemi Step walkway can be fitted with Allukemi Sky guardrails on one or both sides, or with a Securail rail: in the first case, it becomes a collective protection system that allows transit in areas exposed to the danger of falling from heights without the need for PPE, while in the second case, the operator must connect his harness to the sliding trolley by means of a lanyard or retractable fall prevention device.

Accessories

ST01-2017 Gangway

Gangway is used to create a safe passageway and is also available with perforated platforms for better water drainage. 

Material: aluminum alloy 

Fixing: every 3m 

Length: 1 to 6 meters 

Standard walkway width: 600 mm 

ST02-73 Gangways with one guardrail

Gangway is used to create a safe passageway and is also available with perforated platforms for better water drainage. Gangway with a guardrail. 

Material: aluminum alloy 

Fixing: every 3m 

Length: 1 to 6 meters 

Standard walkway width: 600 mm 

Gangway with two guardrails

Gangway is used to create a safe passageway and is also available with perforated platforms for better water drainage. Gangway with 2 guardrails. 

Material: aluminum alloy 

Fixing: every 3m 

Length: 1 to 6 meters 

Standard walkway width: 600 mm 

ST04-73 Ladder

Ladder used at steep slopes or changes in level to give continuity to the gangway. Ladder suitable for slopes between 40° and 65°. 

Material: aluminum alloy 

Finish: natural 

Length: variable 

Standard walkway width: 600mm 

Overpass gangway

TThe overpass walkway is composed of the combination of stairway and gangway sections. It is normally used for overpassing installations, pipelines or crossing areas with particular risks. 

Material: aluminum alloy 

Finish: natural 

Length: variable 

Standard walkway width: 600mm 

ST15 Corrugated sheet mounting support

Universal adaptor plate for supported fixing on corrugated sheet metal. 

The length of the plate allows it to be supported on several sheets so that the load is evenly distributed without damaging the sheet. 

Material: aluminum

Standard fixing pitch: 1 plate | 3 m 

Dimensions: variable according to design requirements 

ST11-2017 Single mounting plate

Single fixing plate used for direct fixing of the gangway on reinforced concrete structures. 

Material: aluminum

Standard fixing pitch: 1 plate | 3 m 

Advantages of system

  • Customized design

  • Wide range of walking surface dimensions (60-120 cm)

  • Continuity of paths in slope changes

  • Maximum flexibility in the design phase

  • Certifications according to the strictest sector regulations

  • Lightness

  • Modularity

  • Simplicity and speed of installation

  • Ten-year product warranty

Genesi

Our reference

Geotechnical engineering – Pordenone

Geotechnical engineering – Pordenone

Browse our catalogue

Catalogue
Fall Protection
Catalogue