Allukemi Step Gangways Gangways and walkways against the risk of failing from heights.

Walkways: Allukemi Step parapets and steps
A line of aluminium gangways and walkways designed to create safe routes with respect to the risk of falling from heights, with reference to access, transit and work at height on non-load-bearing surfaces.
Allukemi Step walkways consist of 25 cm deep side profiles and walkway platforms of variable width from 60 to 120 cm in a single span.
Both elements are manufactured from a corrosion-resistant aluminium alloy and fixed to the joints and supports with stainless steel screws.
Thanks to their conformation, profiles and platforms can be assembled to make up staircases and passages of sheds or steeply sloping sections.
Our technical department is available to study and realise the most suitable solutions for each problem and structure.
The Allukemi Step walkway can be fitted with Allukemi Sky guardrails on one or both sides, or with a Securail rail: in the first case, it becomes a collective protection system that allows transit in areas exposed to the danger of falling from heights without the need for PPE, while in the second case, the operator must connect his harness to the sliding trolley by means of a lanyard or retractable fall prevention device.
Accessories

ST01-2017 Gangway
Gangway is used to create a safe passageway and is also available with perforated platforms for better water drainage.
Material: aluminum alloy
Fixing: every 3m
Length: 1 to 6 meters
Standard walkway width: 600 mm
ST02-73 Gangways with one guardrail
Gangway is used to create a safe passageway and is also available with perforated platforms for better water drainage. Gangway with a guardrail.
Material: aluminum alloy
Fixing: every 3m
Length: 1 to 6 meters
Standard walkway width: 600 mm


Gangway with two guardrails
Gangway is used to create a safe passageway and is also available with perforated platforms for better water drainage. Gangway with 2 guardrails.
Material: aluminum alloy
Fixing: every 3m
Length: 1 to 6 meters
Standard walkway width: 600 mm
ST04-73 Ladder
Ladder used at steep slopes or changes in level to give continuity to the gangway. Ladder suitable for slopes between 40° and 65°.
Material: aluminum alloy
Finish: natural
Length: variable
Standard walkway width: 600mm


Overpass gangway
TThe overpass walkway is composed of the combination of stairway and gangway sections. It is normally used for overpassing installations, pipelines or crossing areas with particular risks.
Material: aluminum alloy
Finish: natural
Length: variable
Standard walkway width: 600mm
ST15 Corrugated sheet mounting support
Universal adaptor plate for supported fixing on corrugated sheet metal.
The length of the plate allows it to be supported on several sheets so that the load is evenly distributed without damaging the sheet.
Material: aluminum
Standard fixing pitch: 1 plate | 3 m
Dimensions: variable according to design requirements


ST11-2017 Single mounting plate
Single fixing plate used for direct fixing of the gangway on reinforced concrete structures.
Material: aluminum
Standard fixing pitch: 1 plate | 3 m
Advantages of system
Customized design
Wide range of walking surface dimensions (60-120 cm)
Continuity of paths in slope changes
Maximum flexibility in the design phase
Certifications according to the strictest sector regulations
Lightness
Modularity
Simplicity and speed of installation
Ten-year product warranty