AluX RailVersatile anchorage device with mobile devices.

Alux Rail is a versatile anchorage device that uses mobile devices (trolleys), for work in restraint, anti-fall, suspension, double rope.

The AluxRail is made of an extruded aluminium alloy profile that guarantees the product’s light weight, resistance to corrosion and weathering, and mechanical strength suitable for the various possible uses.

The rail is installed by attaching ceiling or wall brackets to the structure and, for use as a fall arrest device, the operator must connect their PPE to the high-slide carriage.

Fixing for fall arrest applications must be done every 8 m at the most.
In the case of use for suspension work, fixings must be positioned every 3 m.

The anchorage device complies with several technical standards: EN 795:2012 type D and 16415:2013 and also complies with the requirements of the Italian standard UNI11578:2015, as a permanent device against falls from height.

The ATEX version meets the criteria for use in potentially explosive environments, as certified by TUV in accordance with Directive 2014/34/EU and standards EN 80079-36:2016 and EN 80079-37:2016 class II cat. 2.

It can also be used in zone 1 for dust-based and gas-based explosive atmospheres (group II2G, II2D).

AluxRail can protect up to 4 operators

Components

XR01

Rail

XR21

Junction

XR10

Trolley

XR02

90° curve

XR20

Fixed end stop

Accessories

XR01 Rail

Rail with special profile that forms the main element of the system and must be attached to the main structure.

Material: aluminum extrusion

Length: poles of max 8 m

XR02 90° Curve

90° curve designed to adapt the rail geometry to that of the building. It consists of a straight section 500 mm long on each side of the curve, used to insert the junction element into the system, and a curved section with a minimum radius of 600 mm.

Material: aluminum extrusion

Corner: 90° | Radius: 600 mm

XR03 130° Curve

135° curve designed to adapt the rail geometry to that of the building. It consists of a straight section 500 mm long on each side of the curve, used to insert the junction element into the system, and a curved section with a minimum radius of 600 mm.

Material: aluminum extrusion

Corner: 135° | Radius: 600 mm

XR10 Mobile anchor device (trolley)

Mobile anchor device designed to move on the ceiling and slide along the rail thanks to Teflon wheels. It is essential for the use of the rail.

Material: Stainless steel and aluminum casing with 4 high-slip Teflon wheels

XR10S Mobile device for suspension work

Mobile anchoring device for suspended work designed to be used in combination with XR10. It is equipped with a plate with two brakes to allow work in suspension. The secondary cord must be connected to XR10.

Material: Stainless steel and aluminum casing with 4 high-slip Teflon wheels.

XR10A Mobile device ATEX

Mobile anchor device for ATEX environment, slides along rail with Teflon and brass wheels.

Material: stainless steel and aluminum casing with 2 high-slip Teflon wheels and 2 brass wheels.

XR21 Junction

Junction designed to connect two sections of rail and thanks to an EPD insert that provides continuity and facilitates locking and positioning in the rail. Grooves in the rail profile further facilitate proper positioning of the screws.

Material: stainless steel ed EPDM