Trilob lifelineDeformable lifeline for type C anchorage points.

Deformable lifeline.
The TRILOB TM lifeline complies with the safety requirements set out in standard EN 795:2012 for anchorage devices that fall into type C, i.e. horizontal flexible anchorage lines with a maximum inclination of 15° to the horizontal.
The device also complies with the safety requirements set out in the technical specification CEN/TS16415:2013, which establishes the tests and requirements for devices used simultaneously by several users, and also complies with the Italian standard UNI11578:2015.
The lifeline supports are sized to be mounted on reinforced concrete, wood or steel beams, either directly or with special steel counter plates.
The small size of the elements making up the system and its adaptability make the TRILOB TM line particularly popular for use on buildings of historical and architectural value or on narrow paths with many changes of direction, such as the interior cornices of churches.
In the event of a fall, the intermediate elements deform mechanically, absorbing part of the loads that would otherwise be transmitted to the structure. The intervention of an authorised maintenance technician will check the integrity of the system and restore the elements that have fallen.
The device can be used by 4 operators at the same time and complies with the technical standard EN 795:2012 Type C, the Italian standard UNI11578:2015 and the technical specification CEN|TS 16415:2013; it is covered by a 10-year warranty and subject to annual periodic maintenance.
Advantages
Approved for use by up to 4 operators simultaneously
Large spacing between static restraints, up to 15m
Possibility of direct attachment to structure
Adjustable starting element
Possibility of creating a “closed loop”, with maximum spacing between elements of 4m
Guarantee of constant tension over time, thanks to the plate with inserted SIM card absorber block
Deformability of intermediate elements in the event of a fall
Possibility of making the corner loop without the need for a crimping machine
Simplicity and speed of installation
Reduced loads on structures in the event of a fall
Stamped AISI316 stainless steel elements
Customised design of supports
Minimal aesthetic impact
Ergonomics
Lightness
Modularity
Ten-year warranty
Certifications according to the strictest industry standards
Testing to verify proper installation
Components

TRI10
Energy absorber
TRI1
Mobile anchor point
TRI4
Intermediate element
TRI15
Extremity element